Cylinder Head

    1. 10% off
      Tomei Poncam Type-A Intake and Exhaust Camshaft Set For 99-02 Nissan Skyline GT-R R34 RB26DETT

      Tomei Poncam Type-A Intake and Exhaust Camshaft Set For 99-02 Nissan Skyline GT-R R34 RB26DETT

      Regular Price: $580.00

      Special Price $521.99

      The Tomei Type-A Poncam set is designed to best suit the stock & N1 turbos for optimum performance balance of low to mid range torque. The Exhaust cams duration was reduced to maintain best idling. Details: Intake: 260 Degrees w/ 9.15Lift Exhaust: 252 Degrees w/ 9.15 Lift Purchase includes both exhaust and intake cams Learn More
    2. 10% off
      Tomei Camshaft Pulley Gear Sprocket Intake RB26

      Tomei Camshaft Pulley Gear Sprocket Intake RB26

      Regular Price: $120.00

      Special Price $107.99

      Tomei Adjustable Camshaft Pulley Cam Gear Sprocket for the Nissan Skyline RB20DE(T), RB25DE(T), and RB26DETT. The pulley and gear are made from Duraluminum material for lightweight and strength. One cam gear merely weighs 337g. Tomei cam gear uses sliding type to adjust crank angle. Tomei's quality cam gear for your Skyline engine. Learn More
    3. 10% off
      Tomei Camshaft Pulley Gear Sprocket Exhaust RB26

      Tomei Camshaft Pulley Gear Sprocket Exhaust RB26

      Regular Price: $120.00

      Special Price $107.99

      Tomei Adjustable Camshaft Pulley Cam Gear Sprocket for the Nissan Skyline RB20DE(T), RB25DE(T), and RB26DETT. The pulley and gear are made from Duraluminum material for lightweight and strength. One cam gear merely weighs 337g. Tomei cam gear uses sliding type to adjust crank angle. Tomei's quality cam gear for your Skyline engine. Learn More
    4. 10% off
      Tomei Dual Valve Springs Type C Nissan Skyline GT-R RB26DETT

      Tomei Dual Valve Springs Type C Nissan Skyline GT-R RB26DETT

      Regular Price: $1,010.00

      Special Price $908.99

      This Tomei dual valve spring kit for RB26DETT Engine utilizes a two spring design to provide approximately 11.50 mm lift. These springs and retainers are required if you are using the Tomei Procams. The springs are made of chromoly silicone and nitrided to provide high performance for a high revving motor. Couple this valve spring kit with a Tomei Procam for ultimate performance. Great for high RPMs and is highly resistant to fatigue. Each Tomei Type-C valve spring kit includes a complete set of dual valve springs and retainers. Learn More
    5. 10% off
      Tomei Valve Springs Kit Type B Nissan Skyline GT-R RB26DETT

      Tomei Valve Springs Kit Type B Nissan Skyline GT-R RB26DETT

      Regular Price: $580.00

      Special Price $521.99

      This Tomei valve spring kit for RB26DETT Engine utilizes a spring design to provide approximately 11.50 mm lift. These springs and retainers are required if you are using the Tomei Procams. The springs are made of chromoly silicone and nitrided to provide high performance for a high revving motor. Couple this valve spring kit with a Tomei Procam for ultimate performance. Great for high RPMs and is highly resistant to fatigue. Each Tomei Type-B valve spring kit includes a complete set of valve springs and retainers. Learn More
    6. 10% off
      Tomei Valve Springs Kit Type A Nissan Skyline GT-R RB26DETT

      Tomei Valve Springs Kit Type A Nissan Skyline GT-R RB26DETT

      Regular Price: $360.00

      Special Price $323.99

      This Tomei valve spring kit for RB26DETT Engine utilizes a spring design to provide approximately 10.85 mm lift. These springs are required if you are using the Tomei Procams. The springs are made of chromoly silicone and nitrided to provide high performance for a high revving motor. Couple this valve spring kit with a Tomei Procam for ultimate performance. Great for high RPMs and is highly resistant to fatigue. Learn More
    7. 10% off
      Tomei Oversize Valves For 99-02 Nissan R34 GTR RB26DETT

      Tomei Oversize Valves For 99-02 Nissan R34 GTR RB26DETT

      Regular Price: $804.00

      Special Price $723.59

      The Tomei Oversize Valves have been extencively designed for increased strength and wear resistance while improving air flow dynamics and engine performance. Learn More
    8. 10% off
      Tomei Poncam Type R Camshafts Set Nissan Skyline GT-R RB26DETT

      Tomei Poncam Type R Camshafts Set Nissan Skyline GT-R RB26DETT

      Regular Price: $580.00

      Special Price $521.99

      The Type R camshafts were designed due to popular demand from end users who are looking at upgrading the performance potential of their GTR while staying within the limits of recent street legal requirements. Recent laws on emissions and exhaust noise was made stricter in Japan so to have a quieter car by running smaller exhaust systems raises the exhaust back pressure which greatly reduces the response and hinder performance. Our engineers then designed these Type R camshafts to suit the needs of those who need to keep such setup and benefit with performance gains. Details: Intake: 250 Degrees w/ 9.15Lift Exhaust: 250 Degrees w/ 9.15 Lift Purchase includes both exhaust and intake cams Learn More
    9. 10% off
      Tomei Poncam Type B Camshafts Set Nissan Skyline GT-R RB26DETT

      Tomei Poncam Type B Camshafts Set Nissan Skyline GT-R RB26DETT

      Regular Price: $580.00

      Special Price $521.99

      By extending the duration timing compared to the Tomei Type A Poncams, both response and peak power was raised and these camshafts best compliment the mid to large size turbo charged applications. Details: Intake: 260 Degrees w/ 9.15Lift Exhaust: 260 Degrees w/ 9.15 Lift Purchase includes both exhaust and intake cams Learn More
    10. 10% off
      Tomei Reinforced Headstuds For RB26DETT

      Tomei Reinforced Headstuds For RB26DETT

      Regular Price: $710.00

      Special Price $639.00

      In order to secure the performance of metal head gaskets, Tomei's Reinforced Head Studs will strengthen the formation of the head and cylinder block. Original head bolts have concentrated stress at only 1/3 of its length making that section very weak. Any more torque will most likely break the bolt. These reinforced head studs allow the stress to be dispersed evenly along the threading and secure the head. Learn More