Intake

    1. 10% off
      HKS Premium Suction Kit: 2009 - 2015 R35 GT-R

      HKS Premium Suction Kit: 2009 - 2015 R35 GT-R

      Regular Price: $1,480.00

      Special Price $1,331.00

      The HKS Premium Suction Kit features drop in high flow filters into the stock air boxes for improved performance. The stock intake pipings are replaced with larger diameter pipings allowing for better throttle response. Learn More
    2. AQ Motorsports 3" Modular Intake Kit: 09+ R35 GT-R

      AQ Motorsports 3" Modular Intake Kit: 09+ R35 GT-R

      $990.00
      Starting at the front, the filters are the largest K&N units we could comfortably fit under the bumper with the stock ducting, to ensure a steady stream of clean airflow at high power levels. From the filters, a 3" mandrel bent, polished aluminum tube feeds our MAF housing: The MAF housing is CNC'd aluminum with an 80mm inside diameter. This allows approximately 60% more airflow than a stock diameter housing before maxing out the sensor. The intake pipes fit snugly into the housing, where they are sealed by internal o-rings and held in place by three set screws: The turbo inlet attachment threads onto the MAF housing, and is currently available in stock 2 3/4" diameter as well as 3" for larger turbos. Learn More
    3. AQ Motorsports Cold Air Intake: 09+ R35 GT-R

      AQ Motorsports Cold Air Intake: 09+ R35 GT-R

      $649.99
      The AQ Motorsports GTR Intakes are a direct bolt on replacement for the standard airboxes, dyno proven to provide power and torque gains across the board while lowering intake temperatures and improving spool and throttle response. The intake pipes feature precisely made maf housings the same diameter as stock to allow installation without the need for tuning. They are made from a single continuous piece of mandrel bent 6061 Aluminum to ensure the smoothest and most efficient airflow possible. There are no welds, no hose couplers or beads, and no sharp bends inside these intakes to restrict, interrupt flow, or create inconsistent MAF readings. The filters reside under the bumper cover to draw in cool air, and are the largest K&N units that would fit. Although the installation requires the removal of the bumper skin, using larger filters ensures a steady, clean, and restriction free flow of air to the engine for maximum power gains. Detailed instructions included. Available in polished or wrinkle black finish, made in the USA. Learn More
    4. Boost Logic Intake Manifold: 2009 - 2015 R35 GT-R

      Boost Logic Intake Manifold: 2009 - 2015 R35 GT-R

      $4,495.00
      The Boost Logic VR38DETT Intake Manifold has been engineered to be the pinnacle of performance among its competitors. Benefiting from our extensive research and development in 2000hp 2JZ motors, we have achieved the goals we set for our Manifold. An increase in torque to broaden the power-band while achieving a phenomenal horsepower gain under boost sets the Boost Logic Manifold apart from the competition. On a direct comparison of the manifold with a Greddy, we observed huge power gains while monitoring boost to be identical or lower boost on the Boost Logic Manifold. The gains are even more pronounced when compared to a stock manifold; especially the torque. Engineering the manifold in CAD allowed Boost Logic to use optimal dimensions and otherwise impossible angles determined to be ideal through fluid dynamics in comparison to a sheet metal intake manifold. Boost Logic aimed to maximize the potential of any engine/turbo setup so that this bolt on is beneficial for any HP package. The plenum size has been specifically calculated and sized for the VR38 to create the highest power gains in comparison to the stock and other aftermarket intake manifolds. The tapered venture funnel runners have been engineered for maximum velocity as air approaches the cylinder. We chose to make the intake manifold in one piece to mimic OEM style manufacturing which will have less potential for boost leaks. The tube behind the throttle body flange is 80mm which will easily accept the Greddy throttle bodies or much larger units which will surely be developed in the future. A unique aspect of the Boost Logic intake manifold is the new designed lower runners. Casting these new runners allows us to maintain the linear transition from the aftermarket plenum to the intake ports on the head. When it comes to maximum power, 6 injectors simply aren't capable of providing enough fuel to meet the demands of ethanol fueled engines. We are providing an optional third rail setup which will allow 6 additional injectors aimed directly into the intake port for accurate fueling. The 12 Injector Option will be an extra charge on top of the current intake manifold price. This will include a rail, brackets, extra machining of the Boost Logic Intake Manifold and will be pre-mounted to the plenum upon shipment. The 12 Injector Option comes complete with fuel rail, mounting brackets and machined upper plenum for the 2nd set of injectors. Learn More
    5. SP Engineering Billet Throttle Bodies: 09+ R35 GT-R
    6. 34% off
      K&N Replacement Air Filters: 09+ R35 GT-R

      K&N Replacement Air Filters: 09+ R35 GT-R

      Regular Price: $145.00

      Special Price $95.00

      K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. We make over 1,200 different replacement air filters for virtually every vehicle on the road. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. See applicable instruction sheet for details. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty™ and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED. Learn More
    7. 15% off
      Gotboost Performance 3" Air Intake System: 2009-2013 R35 GT-R

      Gotboost Performance 3" Air Intake System: 2009-2013 R35 GT-R

      Regular Price: $565.00

      Special Price $480.25

      The Gotboost 3″ intake system for R35 GT-R has been engineered and extensively tested to bring you significant gains in horsepower and torque, along with increased boost response and an amazing soundtrack. Available in satin black wrinkle powdercoat or polished finish. • Easy to install. No bumper removal is necessary. Filters are sized to easily fit through the radiator cooling panel without destroying them. Ease of filter install/removal means an owner is likely to clean/service their air cleaners. Filter systems that require bumper removal probably don’t get the regular interval servicing of the air filter elements they require. • Proper MAF orientation with relation to bends. • One piece aluminum mandrel bent tubing. • Mounting bracket to firmly stabilize intake tube. • Show quality welds. fitment, and finish. • Genuine K&N Air Filters with optional Outerwears Pre-Filters – read more… • Silicone couplers with stainless steel clamps. • Easy to tune for your tuner…(MAF re-calibration is necessary, easily done via e-tune) • Awesome performance and sound. • 100% Made in the USA Learn More
    8. 8% off
      TiTek 3 Inch GTR R35 Intake Kit - Polished Aluminum

      TiTek 3 Inch GTR R35 Intake Kit - Polished Aluminum

      Regular Price: $599.00

      Special Price $549.00

      With TiTek’s 3” polished aluminum intake kit for your Nissan GT-R you’ll be able to see significant power gains acrossthe entire power band as well as increased turbo spool music to your ears. This kit is a direct replacement of the factory air box and does not require removal of the bumper. • (2) Polished aluminum intake pipes • (2) TiTek air filters • (2) 4 ply silicone hose • Integrated mounting bracket • Hardware • Easy installation • No bumper removal necessary Learn More
    9. 10% off
      GReddy RX Intake Manifold Plenum with Injector Boss

      GReddy RX Intake Manifold Plenum with Injector Boss

      Regular Price: $3,500.00

      Special Price $3,150.00

      Cast Aluminum high-flow intake Manifold for VR engine with additional Injector Bosses UPDATE: (now pre-drilled, with include billet plugs) For extra high horsepower applications. This RX SPL manifold features 6 boss locations to allow for 6 additional injectors to be positioned at the base of each runner for secondary injectors. Engineered to equalize flow and improve efficiency, this precision cast-Aluminum surge tank was designed for maximum performance. It was developed and manufactured in Japan and has been proven on the track with the 200+mph GReddy 35RX GT-R, well as in the USA with the 8.79sec Quarter-mile SP Engineering / HDM GT-R. The carefully computer-modeled RX Intake Manifold features a optimized 3-piece design with large 58mm diameter runners (OEM 56mm,) with integral velocity stacks for the center section. It has a symmetrical Left and Right surge tanks that are 85% larger then the factory Nissan VR38 intake manifold. The improved design routes air-flow more evenly to each cylinder. The GReddy RX Intake Manifold is also compatible with both the factory throttle bodies or the new big bore, billet GReddy RX Throttle Kit (sold separately). Learn More
    10. 5% off
      GReddy Airinx Intake Kit: 2009 - 2015 R35 GT-R

      GReddy Airinx Intake Kit: 2009 - 2015 R35 GT-R

      Regular Price: $1,225.00

      Special Price $1,163.75

      Airinx Air Intake Kits, are complete vehicle specific systems. They are broken down into two main types. One is a simple to install Airinx combination with a one-piece molded internal funnel and pipe or airflow meter adapter. The second type adds smooth flowing mandrel-bent aluminum piping to improve air flow response, and in some case relocation of the air filter for better performance. Learn More