Brake Ducts/Cooling

    1. 5% off
      TiTek Carbon Fiber Track Spec Air Brake Guides (Front & Rear): Nissan GTR R35 (2009-2014)

      TiTek Carbon Fiber Track Spec Air Brake Guides (Front & Rear): Nissan GTR R35 (2009-2014)

      Regular Price: $1,299.00

      Special Price $1,234.00

      TiTek’s Track Spec Air Brake Guides for the Nissan GTR R35 2009-2014 will channel sufficient air from the front of the vehicle towards the brake system (calipers, rotors, pads). Efficient air ducting system provided can prevent overheating which greatly improves pad life making a difference during any type of driving conditions. Guides and brackets are made from a dry carbon vacuum infused procedure for strength and weight savings (1.1lbs). The air ducts simply bolt on to your front OEM sway bar and rear OEM traction rods with supplied hardware. Learn More
    2. 18% off
      Rexpeed GTR Brake Cooling Guides Nissan GT-R 2009-2015

      Rexpeed GTR Brake Cooling Guides Nissan GT-R 2009-2015

      Regular Price: $360.00

      Special Price $295.00

      INCLUDES FREE EXPRESS SHIPPING! (not reflected in the "list price") Made from durable high strength dry carbon fiber. These are super lightweight and rock solid all the pieces are made from dry carbon. Easy bolt on installation takes 20 minutes for both sides. Simple and inexpensive solution for cooler brakes higly recommended if you track your GTR! Fits 22-19inch wheels. Learn More
    3. Willall R35 Brake Cooling System: 09+ R35 GT-R

      Willall R35 Brake Cooling System: 09+ R35 GT-R

      $1,615.00
      Hard driven GTRs place tremendous load on the front brakes. Cracked rotors and delaminated brake pads are the result of this making expensive hardware changes and upgrades a necessity when going to the track. WR35WS does away with this high wear rate, significantly lowering brake temperatures by automatically injecting a water spray into the centre of the disc under hard driving conditions. A Microprocessor controller feeds water from a 2 gallon tank through CNC machined brackets and into the discs lowering operating temperature by up to 200F and keeping a hard high brake pedal in the most demanding of conditions. Brake pad and rotor life has been extended up to 50% via fitment and use of WR35FS, as well as total braking performance with zero fade guaranteed in even the toughest operating conditions. The result is like much bigger and far more expensive competition brakes, but with the ability to still use 18 inch rims. WR35WS is a must for the serious track day enthusiast. • 1 x 2 Gallon water reservoir • 1 x WR35WS control loom complete with backlit switch/relays/fully marked • 1 x WR35WS Programmable control box • 1 x Threaded Tee piece • 2 x Stainless Steel braided lines • 2 x WR35WS Spray jets • 2 x WR35WS CNC Mounting brackets • 1 x WR35WS One Way valve • 4 x P mounting clips • 6ft x rubber hose Learn More
    4. 6% off
      Stillen Active Rear Brake Cooling Kit: 2009 - 2015 R35 GT-R

      Stillen Active Rear Brake Cooling Kit: 2009 - 2015 R35 GT-R

      Regular Price: $334.75

      Special Price $314.67

      STILLEN is proud to offer an active brake cooling option for R35 GT-R owners looking to improve track times and lower brake temperatures. These kits are for use with both traditional iron rotors, as well as the STILLEN Carbon Ceramic Matrix Brake Kit. The front brake cooling kit consists of a weather resistant electric fan, mounting brackets, wiring kit and switch, and poly-urethane air diversion splitter. The rear brake cooling kit consists of poly urethane air scoops which take advantage of the factory naca ducts in the belly pan, accordion tube, polyurethane air funnel and mounting bracketry. Learn More
    5. 6% off
      Stillen Active Front Brake Cooling Kit: 2009 - 2015 R35 GT-R

      Stillen Active Front Brake Cooling Kit: 2009 - 2015 R35 GT-R

      Regular Price: $509.85

      Special Price $479.26

      STILLEN is proud to offer an active brake cooling option for R35 GT-R owners looking to improve track times and lower brake temperatures. These kits are for use with both traditional iron rotors, as well as the STILLEN Carbon Ceramic Matrix Brake Kit. The front brake cooling kit consists of a weather resistant electric fan, mounting brackets, wiring kit and switch, and poly-urethane air diversion splitter. The rear brake cooling kit consists of poly urethane air scoops which take advantage of the factory naca ducts in the belly pan, accordion tube, polyurethane air funnel and mounting bracketry. Learn More
    6. 15% off
      Kansai Service Front Brake Cooling Air Guide: 09+ R35 GT-R

      Kansai Service Front Brake Cooling Air Guide: 09+ R35 GT-R

      Regular Price: $580.00

      Special Price $493.00

      Items required when driving at high speed! Will reduce the wear of the brake rotor and pads by lowering the temperature of the entire brake system, and also reduce the deterioration of brake feel when driving hard. Lightweight carbon material used to guide air body, status of the aluminum surface treated to excellent weather resistance, was to minimize the increase in weight while maintaining durability. * Please note that this product will not work with bigger diameter sway bars or sway bars with different bends in them * Learn More